Dallas's trusted spray foam contractor for commercial roofing, residential insulation, and emergency roof repair across Georgia.
Professional roofing, coating, and insulation services for Dallas property owners and facility managers.
Stop chasing flat roof leaks with temporary fixes. Our diagnostic approach pinpoints the exact failure point, and our repair methods address the root cause — whether it is failed flashing, membrane damage, or ponding water that needs re-sloping.
Metal roofs leak at fasteners, seams, and panel overlaps. Our coating systems bridge and seal every one of these failure points while adding a reflective finish that reduces surface temperatures and cooling costs significantly.
Waterproof your flat or low-slope roof with a spray-applied membrane system that eliminates the seam failures, flashing leaks, and ponding damage that plague conventional roofing. One seamless application. Permanent results.
Spray foam roofs are built to last, but they do need occasional repair. Our crews fix bird pecks, foot traffic damage, hail impacts, and coating wear — extending the life of your SPF system without a costly full recoat.
When severe weather damages your roof, our storm response crews deploy fast — securing your property, documenting every impact point for your insurance claim, and restoring your roof with quality materials and expert workmanship.
Active roof leak? We locate the source using advanced detection methods, then repair it permanently at the root cause. No guesswork, no temporary patches — just lasting results backed by our workmanship warranty.
High-performance silicone roof coatings that resist ponding water, UV degradation, and extreme temperatures. Unlike acrylics, silicone does not re-emulsify in standing water — making it ideal for flat roofs with drainage challenges.
Complete SPF roof systems for commercial and residential buildings. Our factory-trained crews apply closed-cell foam directly to your roof deck, creating a monolithic waterproof membrane that eliminates seams, joints, and the leak points they create.
Our replacement process is thorough: remove existing roofing to the deck, inspect and repair substrate, apply closed-cell SPF to specified thickness, and finish with a UV-protective coating. The result is a monolithic roof system with no seams to fail.
Upgrade your attic insulation from fiberglass or cellulose to spray foam and feel the difference the same day. SPF does not settle, sag, or leave gaps — it expands to fill every cavity and seals air leaks that other materials miss.
Large-scale commercial roof restoration using SPF and coating systems that extend roof life by 20 or more years without the cost and disruption of full replacement. Phased scheduling available to keep your business operational.
Spray foam insulation for crawl space walls, rim joists, and band boards that eliminates moisture, cold floors, and musty odors. Closed-cell foam acts as both insulation and vapor barrier in a single application.
Our maintenance programs extend roof life and reduce total cost of ownership. Semi-annual or annual visits include drain clearing, seam inspection, penetration checks, coating condition assessment, and immediate repair of minor issues.
Know the true condition of your roof before problems escalate. Our inspection process covers every component — membrane, flashings, penetrations, drains, and substrate — and delivers a clear, actionable report you can trust.
When your roof is structurally sound but the surface is deteriorating, restoration is the smart investment. We clean, repair, and recoat your entire roof with a warranted system that performs like new at a fraction of replacement cost.
Dallas, GA experiences the kind of temperature swings that punish conventional roofing and insulation. Lapolla Industries installs spray polyurethane foam systems engineered to perform in exactly these conditions — continuous insulation with no thermal bridging, no seams, and no weak points where Georgia weather can exploit gaps in your building envelope.
For Dallas businesses watching their utility bills climb, a spray foam roof restoration can reduce cooling costs by 20 to 40 percent while extending roof life by 20 or more years. For homeowners, attic and crawl space insulation with closed-cell SPF eliminates hot spots, cold drafts, and the energy waste that comes with them. Call (866) 605-0362 for a free energy assessment.
Quality, integrity, and results — the Lapolla Industries difference for Dallas property owners.
Our crews live and work in the communities we serve. We understand local building codes, climate conditions, and the best SPF systems for your specific region.
Storms do not wait and neither do we. Our emergency crews are on call around the clock to tarp, secure, and protect your property when you need it most.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
Lapolla Industries has been at the forefront of spray polyurethane foam technology since 2003 — with deep roots in SPF manufacturing and application that few competitors can match.
Every project starts with a no-obligation inspection using infrared moisture scanning and visual assessment. We identify every issue and provide an honest, transparent estimate.
Answers to the most frequently asked spray foam questions from Dallas property owners.
Spray foam insulation costs in Dallas typically range from $1.50 to $3.50 per square foot for open-cell and $3.00 to $7.00 per square foot for closed-cell. The exact price depends on the area being insulated, foam thickness, and accessibility. Most Dallas homeowners see a full return on investment through energy savings within 3 to 5 years.
Closed-cell foam is denser, provides a higher R-value per inch (R-6.5 vs R-3.7), and acts as a vapor and moisture barrier. Open-cell foam is lighter, more flexible, and more affordable. For roofing applications in Dallas we typically recommend closed-cell for its waterproofing properties. For interior wall insulation, either type may be appropriate.
Spray foam is one of the best solutions for flat and low-slope roofs in Dallas. The seamless application eliminates the seams and joints where conventional flat roof systems fail. SPF also self-levels to eliminate ponding water — one of the biggest causes of flat roof leaks and premature failure.
Call us immediately for emergency tarping to prevent further water damage. Our Dallas storm damage crews respond quickly to secure your property, document all damage with photos and measurements for your insurance claim, and provide a complete restoration plan. We work directly with insurance adjusters to ensure your claim is handled smoothly.
Yes. Every Dallas crew is fully licensed, bonded, and insured for spray foam roofing and insulation work. We carry general liability and workers compensation coverage on every project. You can request proof of insurance before any work begins.
Yes. Every project in Dallas begins with a no-obligation roof inspection. Our crews assess the condition of your existing roof, identify problem areas using infrared moisture scanning when needed, and provide a detailed estimate with photos and recommendations. There is never a charge for the initial inspection.
Real reviews from property owners we have served across the country.
"Had our attic insulated with spray foam after years of fiberglass that kept settling and losing its R-value. Lapolla Industries did a clean install — no gaps, no missed spots. Our HVAC system runs half as much now."
"We had a persistent leak that three different contractors could not find. Their team used moisture scanning equipment and pinpointed it to a failed pipe boot in minutes. Fixed it the same day. Incredible diagnostic work."
"Our old three-layer built-up roof was beyond saving. They stripped everything down to the deck, repaired the substrate, and installed a new spray foam roofing system. The building is better insulated now than it has ever been."
Lapolla Industries proudly serves property owners in these cities near Dallas.